Standing seam and Tuff Rib metal roofs that shrug off the UV, wind, and freeze-thaw that wear out everything else — installed by a local crew, likely the last roof you'll buy.
Metal isn't the right roof for every house or every budget — but in Western Slope conditions, it has real advantages worth understanding.
High-altitude UV is what kills roofs here — it dries shingles until they curl and crack. Metal simply doesn't care. The finish mellows over decades; the panel stays sound.
A properly installed metal roof runs decades beyond any asphalt product — for many homeowners it's genuinely the last roof they buy.
Metal sheds snow instead of holding it, which means less load and fewer ice dams. We add snow guards above doorways and walkways so it sheds politely.
Interlocked panels have no tabs to lift and no edges to peel. The canyon gusts that strip shingle roofs mostly just make a metal roof hum.
Metal is noncombustible — a meaningful edge for homes near open country and blowing embers, and a factor some insurers look on kindly.
Metal reflects solar heat instead of soaking it up the way dark asphalt does, which takes real strain off your AC in a Grand Valley July.
The honest counterweight: metal costs meaningfully more up front, and large hail dents it — more on both below, because you should hear it from us.
Standing seam is the premium system: panels lock together and the fasteners hide underneath, so nothing penetrates the surface and nothing is exposed to weather. It's the cleanest look and the longest service life — and the higher price.
Tuff Rib (the classic ribbed, corrugated-style exposed-fastener steel panel) delivers most of metal's advantages at a friendlier cost. The trade: its gasketed screws are exposed to the sun, so they want a checkup every handful of years.
Ready to go deeper? Each system has its own page: standing seam metal roofing and Tuff Rib metal roofing.
A metal roof is a precision job — panels cut to your roof, trim formed to its edges. Most installs run one to three days depending on size and complexity, and we'll tell you which yours is up front.
On the roof with a tape, not over it with a satellite. You get a written, itemized estimate and a straight comparison against shingle if you're weighing both.
Standing seam or Tuff Rib, gauge, and color — with real samples in your hand and honest talk about the trade-offs of each.
Your panels are cut to your roof's exact dimensions before install day, which is part of why metal jobs are scheduled rather than rushed.
Old roof off, every sheet of decking inspected, and high-temp underlayment down — the foundation a decades-long roof deserves.
Panels set true, seams locked or fasteners gasketed, and every edge, valley, and penetration trimmed and flashed to spec. This is where craftsmanship shows.
Magnets through the yard, every offcut hauled away, and a walkthrough with you — plus photos of the finished details you'd need a ladder to see.
The price: metal runs a real multiple of shingle up front. The math works if you're staying 15+ years or buying your last roof; if you're selling within a decade, a quality shingle roof usually pencils better. The hail caveat: big hail rarely breaks a metal roof, but it can dent one — and some insurance policies carry a "cosmetic damage" exclusion for metal. Check your policy for that clause before you commit; it matters more in our hail country than the brochures admit.
The rain myth: a metal roof over solid decking and underlayment isn't the barn roof you camped under. It's no louder than shingle in a storm — the drum effect needs an open frame underneath, which your house doesn't have. If the building in question is a shop or a commercial property rather than a house, that's its own conversation.
Spreading the cost out? Financing options are available on every roof we install.
"APX Roofing replaced our roof and their crew was friendly and professional. You could tell this wasn't their first rodeo!"
"I worked with APX Roofing in Grand Junction. Honest and direct."
Not on a house. The rain-on-a-tin-roof sound needs an open frame underneath — a barn, a porch awning. Over solid decking and underlayment, a metal roof is about as quiet as shingle. Most owners say they can't tell the difference from inside.
It almost never punctures one, but large stones can dent it. The catch is insurance: some policies exclude "cosmetic" hail damage on metal, meaning dents on a still-watertight roof may not be covered. We'll flag the clause to look for before you commit — it's the most important fine print in this decision.
Read: Metal vs. shingle on the Western Slope →Decades — properly installed, metal outlasts any asphalt product by a wide margin, and our UV (which is what actually kills shingle roofs here) barely touches it. For many homeowners it's the last roof they ever buy.
Sometimes code allows it, but we usually recommend a full tear-off anyway: it's the only way to inspect the decking, and a decades-long roof deserves to start on a verified deck. We'll give you an honest answer for your specific roof.
Standing seam hides its fasteners under interlocking panels — premium longevity, premium price. Tuff Rib fastens through the panel with gasketed screws — most of the benefit at a friendlier cost, with a fastener checkup every several years. We install both and will tell you which fits your house.
The opposite. Metal reflects solar heat that dark asphalt absorbs, so attics under metal roofs generally run cooler in a Grand Valley summer — your AC notices.
We'll measure the roof, walk you through standing seam vs. Tuff Rib with samples in hand, and give you a written estimate — including a straight comparison against shingle if you're deciding.
